prikaz prve stranice dokumenta VODIČ KROZ SCADA PROGRAMIRANJE S PRIMJEROM TIA PORTALA
  Download
PDF 2.82 MB
undergraduate thesis
VODIČ KROZ SCADA PROGRAMIRANJE S PRIMJEROM TIA PORTALA
2020. urn:nbn:hr:128:083706
Dobrenić, Ivo
Karlovac University of Applied Sciences
The Department of Mechanical Engineering

Cite this document

Dobrenić, I. (2020). VODIČ KROZ SCADA PROGRAMIRANJE S PRIMJEROM TIA PORTALA (Undergraduate thesis). Karlovac: Karlovac University of Applied Sciences. Retrieved from https://urn.nsk.hr/urn:nbn:hr:128:083706

Dobrenić, Ivo. "VODIČ KROZ SCADA PROGRAMIRANJE S PRIMJEROM TIA PORTALA." Undergraduate thesis, Karlovac University of Applied Sciences, 2020. https://urn.nsk.hr/urn:nbn:hr:128:083706

Dobrenić, Ivo. "VODIČ KROZ SCADA PROGRAMIRANJE S PRIMJEROM TIA PORTALA." Undergraduate thesis, Karlovac University of Applied Sciences, 2020. https://urn.nsk.hr/urn:nbn:hr:128:083706

Dobrenić, I. (2020). 'VODIČ KROZ SCADA PROGRAMIRANJE S PRIMJEROM TIA PORTALA', Undergraduate thesis, Karlovac University of Applied Sciences, accessed 20 April 2024, https://urn.nsk.hr/urn:nbn:hr:128:083706

Dobrenić I. VODIČ KROZ SCADA PROGRAMIRANJE S PRIMJEROM TIA PORTALA [Undergraduate thesis]. Karlovac: Karlovac University of Applied Sciences; 2020 [cited 2024 April 20] Available at: https://urn.nsk.hr/urn:nbn:hr:128:083706

I. Dobrenić, "VODIČ KROZ SCADA PROGRAMIRANJE S PRIMJEROM TIA PORTALA", Undergraduate thesis, Karlovac University of Applied Sciences, Karlovac, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:128:083706

Please login to the repository to save this object to your list.
Metadata
TitleVODIČ KROZ SCADA PROGRAMIRANJE S PRIMJEROM TIA PORTALA
Title (english)TIA PORTAL APPLICATION IN SCADA PROGRAMMING
AuthorIvo Dobrenić
MentorVladimir Tudić (mentor)
Committee memberDamir Kralj (predsjednik povjerenstva)
Committee memberFilip Žugčić (član povjerenstva)
Committee memberVladimir Tudić (član povjerenstva)
GranterKarlovac University of Applied Sciences
(The Department of Mechanical Engineering)
Karlovac
Defense date and country2020-06-10, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Sadržaj rada obrađuje temu nadzora, kontrole i automatskog upravljanja industrijskih sustava. Konkretno jedan od danas najzastupljenijih sustava automatizacije poznatog kao SCADA (Supervisory Control And Data Acquisition). U radu je detaljno obrazložena povijest razvoja, funkcija i implementacija sustava kao i mane istog. Drugi dio rada odnosi se na vodič s generalnim uputama za programiranje u jednom od najzastupljenijih programskih sučelja za ove sustave (TIA Portal). Sučelje je namijenjeno za konfiguraciju, logičko programiranje, testiranje i dijagnozu svih SIMATIC kontrolera, odnosno kontrolera proizvedenih od njemačke kompanije Siemens. Za potrebe ovog rada koristit će se simulacija SIMATIC S7-1500 PLC kontrolera s posebnim modulima za digitalni i analogni input/output, a za HMI (Human-Machine Interface) odnosno grafičko sučelje za nadzor i upravljanje korišten je program WinCC. Kao primjer programiran je i simuliran sustav upravljanja autopraonice. Rad je također nadopunjen teorijskim cjelinama koje objašnjavaju komponente SCADA sustava kao što su PLC, RTU, komunikacijska infrastruktura i HMI.
Abstract (english)
Content of the paper deals with the topic of supervision, commission and automation control of industrial systems. In particular, one of the most common automation systems today known as SCADA (Supervisory Control And Data Acquisition). The history of system development, functions and implementation as well as its flaws is explained in detail in the paper. The second part of the paper deals with a guide with general programming instructions in one of the most common programming interfaces for these systems (TIA Portal). The interface is intended for the configuration, logical programming, testing and diagnosis of all SIMATIC controllers, which are manufactured by German company Siemens. For the purposes of this work, it will be used simulation of the SIMATIC S7-1500 PLC controller with special modules for digital and analog input / output, and for HMI (Human-Machine Interface), graphical interface for monitoring and control the WinCC program was used. As an example, the car wash management system was programmed and simulated. The paper is also complemented by theoretical units that explain the components of SCADA systems such as PLC, RTU, communication infrastructure and HMI.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:128:083706
Study programmeTitle: Mechatronics
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2020-07-20 12:42:15