prikaz prve stranice dokumenta PROTOTIP NOSAČA ZA ŠTAPOVE
No public access
undergraduate thesis
PROTOTIP NOSAČA ZA ŠTAPOVE
2023. urn:nbn:hr:128:696775
Khaiat Mardnli, Ammar
Karlovac University of Applied Sciences
The Department of Mechanical Engineering

Cite this document

Khaiat Mardnli, A. (2023). PROTOTIP NOSAČA ZA ŠTAPOVE (Undergraduate thesis). Karlovac: Karlovac University of Applied Sciences. Retrieved from https://urn.nsk.hr/urn:nbn:hr:128:696775

Khaiat Mardnli, Ammar. "PROTOTIP NOSAČA ZA ŠTAPOVE." Undergraduate thesis, Karlovac University of Applied Sciences, 2023. https://urn.nsk.hr/urn:nbn:hr:128:696775

Khaiat Mardnli, Ammar. "PROTOTIP NOSAČA ZA ŠTAPOVE." Undergraduate thesis, Karlovac University of Applied Sciences, 2023. https://urn.nsk.hr/urn:nbn:hr:128:696775

Khaiat Mardnli, A. (2023). 'PROTOTIP NOSAČA ZA ŠTAPOVE', Undergraduate thesis, Karlovac University of Applied Sciences, accessed 18 April 2024, https://urn.nsk.hr/urn:nbn:hr:128:696775

Khaiat Mardnli A. PROTOTIP NOSAČA ZA ŠTAPOVE [Undergraduate thesis]. Karlovac: Karlovac University of Applied Sciences; 2023 [cited 2024 April 18] Available at: https://urn.nsk.hr/urn:nbn:hr:128:696775

A. Khaiat Mardnli, "PROTOTIP NOSAČA ZA ŠTAPOVE", Undergraduate thesis, Karlovac University of Applied Sciences, Karlovac, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:128:696775

Please login to the repository to save this object to your list.
Metadata
TitlePROTOTIP NOSAČA ZA ŠTAPOVE
Title (english)ROD HOLDER PROTOTYPE
AuthorAmmar Khaiat Mardnli
MentorNikola Šimunić (mentor)
Committee memberTihana Kostadin (predsjednik povjerenstva)
Committee memberTomislav Božić (član povjerenstva)
Committee memberNikola Šimunić (član povjerenstva)
Committee memberNatalija Kusanić Belinić (član povjerenstva)
GranterKarlovac University of Applied Sciences
(The Department of Mechanical Engineering)
Karlovac
Defense date and country2023-09-18, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Tema završnog rada je izrada prototipa nosača štapova aditivnom tehnologijom. Objasnit ćemo najčešće korištene tehnologije u industriji, također pokazati način rada svake od tih tehnologija i nabrojali par materijala koje se najčešće koriste. U drugom dijelu ovog završnog rada bit će prikazana izrada prototipa modela i izračun potrebnih kalkulacija sustava. Bit će prikazana početna skica modela, istraživanje tržišta i komentari pozitivne i negativne strane tih modela. Prikazat će se postepana obrada kako smo stigli do finalnog prototipa i kako se prototip pripremao za 3D print.
Abstract (english)
The topic of the final paper is the creation of a prototype fishing rod carrier using additive technology, and we will explain the most commonly used technologies in the industry, also show how each of these technologies work and list a few materials that are most often used as well as a number of other technologies. In the second part of this final paper, the creation of a prototype model and the calculation of the necessary system calculations will be presented, it will be shown how we made the initial sketch, researched the market and commented on the positive and negative sides of those models on the market. The step-by-step process of how we reached the final prototype and how the prototype was prepared for 3D printing will be shown.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:128:696775
Study programmeTitle: Mechatronics
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Created on2024-01-12 12:39:02