prikaz prve stranice dokumenta Utjecaj parametara ispisa (ispunjenosti) na žilavost epruveta izrađenih FDM tehnologijom
  Download
PDF 2.18 MB
undergraduate thesis
Utjecaj parametara ispisa (ispunjenosti) na žilavost epruveta izrađenih FDM tehnologijom
2018. urn:nbn:hr:128:056303
Trivić, Filip
Karlovac University of Applied Sciences
The Department of Mechanical Engineering

Cite this document

Trivić, F. (2018). Utjecaj parametara ispisa (ispunjenosti) na žilavost epruveta izrađenih FDM tehnologijom (Undergraduate thesis). Retrieved from https://urn.nsk.hr/urn:nbn:hr:128:056303

Trivić, Filip. "Utjecaj parametara ispisa (ispunjenosti) na žilavost epruveta izrađenih FDM tehnologijom." Undergraduate thesis, Karlovac University of Applied Sciences, 2018. https://urn.nsk.hr/urn:nbn:hr:128:056303

Trivić, Filip. "Utjecaj parametara ispisa (ispunjenosti) na žilavost epruveta izrađenih FDM tehnologijom." Undergraduate thesis, Karlovac University of Applied Sciences, 2018. https://urn.nsk.hr/urn:nbn:hr:128:056303

Trivić, F. (2018). 'Utjecaj parametara ispisa (ispunjenosti) na žilavost epruveta izrađenih FDM tehnologijom', Undergraduate thesis, Karlovac University of Applied Sciences, accessed 13 April 2021, https://urn.nsk.hr/urn:nbn:hr:128:056303

Trivić F. Utjecaj parametara ispisa (ispunjenosti) na žilavost epruveta izrađenih FDM tehnologijom [Undergraduate thesis]. Karlovac: Karlovac University of Applied Sciences; 2018 [cited 2021 April 13] Available at: https://urn.nsk.hr/urn:nbn:hr:128:056303

F. Trivić, "Utjecaj parametara ispisa (ispunjenosti) na žilavost epruveta izrađenih FDM tehnologijom", Undergraduate thesis, Karlovac University of Applied Sciences, Karlovac, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:128:056303

Islandora Bookmark - Please login to use this feature
Metadata
TitleUtjecaj parametara ispisa (ispunjenosti) na žilavost epruveta izrađenih FDM tehnologijom
Title (english)The effect of print parameters (infill) on the toughness of specimens produced by FDM technology
AuthorFilip Trivić
MentorNikola Šimunić (mentor)
GranterKarlovac University of Applied Sciences
(The Department of Mechanical Engineering)
Karlovac
Defense date and country2018-03-29, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
Aditivna tehnologija svakim danom sve više napreduje, te se pod ovim pojmom podrazumijevaju različiti postupci izrade prototipova i malih serija komada. Svi postupci dijele zajednički proces u kojemu se stvara model sloj po sloj iz računalno izrađenog CAD 3D modela. Postoje mnoge vrste aditivne tehnologije, no u ovom završnom radu su opisani samo najpopularniji postupci s naglaskom na FDM postupak pomoću kojega su izrađene epruvete za ispitivanje. Svi postupci imaju prednosti i nedostatke, koji ovise o kompliciranosti izrade modela, kvaliteti dobivenog vanjskog izgleda, mehaničkim svojstvima i sl. U sklopu ovog završnog rada provedeno je ispitivanje udarnog rada loma na epruvetama izrađenim FDM postupkom. Epruvete su izrađene s točno određenim parametrima te s različitim postotkom ispunjenosti koji se kretao od 20 do 100%. Rezultati mjerenja prikazani su u tablicama, te je napravljena njihova analiza.
Abstract (english)
Aditive technology is progressing every day, and under this concept are involved various prototype and small series production processes. All procedures share a common process in which a layered model is created from a computer generated CAD 3D model. There are many types of additive technology, but in this final assignment only the most popular procedures are described, with an emphasis on the FDM process by which test specimens were made. All processes have advantages and disadvantages, which depend on the complexity of model making, the quality of the exterior appearance, the mechanical properties, and the like. Within this final assignment, an impact test was carried out on the specimens made with the FDM process. The specimens were made with the exact parameters and with different percentages of infill ranging from 20 to 100%. The measurement results are presented in the tables, and their analysis was performed.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:128:056303
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2018-07-11 09:59:04