prikaz prve stranice dokumenta KONSTRUIRANJE ASIMETRIČNE VIJČANE AUTOMOBILSKE ELEKTROMOTORNE DIZALICE
  Download
PDF 4.65 MB
master's thesis
KONSTRUIRANJE ASIMETRIČNE VIJČANE AUTOMOBILSKE ELEKTROMOTORNE DIZALICE
2021. urn:nbn:hr:128:202766
Milevoj, Mauricio
Karlovac University of Applied Sciences
The Department of Mechanical Engineering
Specialist Graduate Study of Mechanical Engineering - Part-time study

Cite this document

Milevoj, M. (2021). KONSTRUIRANJE ASIMETRIČNE VIJČANE AUTOMOBILSKE ELEKTROMOTORNE DIZALICE (Master's thesis). Karlovac: Karlovac University of Applied Sciences. Retrieved from https://urn.nsk.hr/urn:nbn:hr:128:202766

Milevoj, Mauricio. "KONSTRUIRANJE ASIMETRIČNE VIJČANE AUTOMOBILSKE ELEKTROMOTORNE DIZALICE." Master's thesis, Karlovac University of Applied Sciences, 2021. https://urn.nsk.hr/urn:nbn:hr:128:202766

Milevoj, Mauricio. "KONSTRUIRANJE ASIMETRIČNE VIJČANE AUTOMOBILSKE ELEKTROMOTORNE DIZALICE." Master's thesis, Karlovac University of Applied Sciences, 2021. https://urn.nsk.hr/urn:nbn:hr:128:202766

Milevoj, M. (2021). 'KONSTRUIRANJE ASIMETRIČNE VIJČANE AUTOMOBILSKE ELEKTROMOTORNE DIZALICE', Master's thesis, Karlovac University of Applied Sciences, accessed 18 April 2024, https://urn.nsk.hr/urn:nbn:hr:128:202766

Milevoj M. KONSTRUIRANJE ASIMETRIČNE VIJČANE AUTOMOBILSKE ELEKTROMOTORNE DIZALICE [Master's thesis]. Karlovac: Karlovac University of Applied Sciences; 2021 [cited 2024 April 18] Available at: https://urn.nsk.hr/urn:nbn:hr:128:202766

M. Milevoj, "KONSTRUIRANJE ASIMETRIČNE VIJČANE AUTOMOBILSKE ELEKTROMOTORNE DIZALICE", Master's thesis, Karlovac University of Applied Sciences, Karlovac, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:128:202766

Please login to the repository to save this object to your list.
Metadata
TitleKONSTRUIRANJE ASIMETRIČNE VIJČANE AUTOMOBILSKE ELEKTROMOTORNE DIZALICE
Title (english)DESIGN OF AN ELECTROMECHANICAL ASYMMETRIC VEHICLE SPINDLE LIFT
AuthorMauricio Milevoj
MentorJosip Hoster (mentor)
Committee memberTihana Kostadin (predsjednik povjerenstva)
Committee memberNikola Šimunić (član povjerenstva)
Committee memberJosip Hoster (član povjerenstva)
Committee memberNatalija Kusanić Belinić (član povjerenstva)
GranterKarlovac University of Applied Sciences
(The Department of Mechanical Engineering)
(Specialist Graduate Study of Mechanical Engineering - Part-time study)
Karlovac
Defense date and country2021-04-21, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
General Mechanical Engineering (Construction)
Abstract
U ovom diplomskom radu prikazano je konstruiranje dvostupne asimetrične vijčane dizalice za podizanje vozila do 3500 kg, u svrhu servisiranja. Dizalica se sastoji od dva nosiva stupa, koji svaki ima po dva kraka različite duljine. Prijenos gibanja s motora na vreteno vrši se pomoću zupčastog para, koji ima ulogu reduktora. Prijenos gibanja s jednog vretena na drugo ostvaruje se lančanim prijenosom. Prema projektnim zahtjevima napravljen je analitički proračun svih potrebnih komponenti i nosive konstrukcije dvostupne dizalice. Na osnovu dobivenih rezultata projektiran je CAD model. Za proračun nosive konstrukcije asimetrične dvostupne vijčane dizalice, izradu CAD modela i tehničke dokumentacije korišten je programski paket CATIA V5.
Abstract (english)
In this paper, the design of a two post asymmetric spindle for lifting vehicles up to 3500 kg, for the purpose of servicing, is presented. The lift consists of two supporting pillars, each with two arms of different lengths. The transmission of motion from the motor to the spindle is done by means of a gear pair, which acts as a reducer. The transmission of motion from one spindle to another is accomplished by chain transmission. According to the design requirements, an analytical calculation of all necessary components and load-bearing structures of the two post lift was made. Based on the obtained results, a CAD model was designed. The CATIA V5 software package was used for the calculation of the load-bearing structure of the asymmetric two post spindle, creation of the CAD model and production of technical documentation.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:128:202766
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: specialist graduate
Academic / professional title: stručni/a specijalist/specijalistica inženjer/inženjerka strojarstva (stručni/a specijalist/specijalistica inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2021-05-26 12:13:30