prikaz prve stranice dokumenta TRADICIONALNO SLOBODNO KOVANJE
  Download
PDF 28.01 MB
master's thesis
TRADICIONALNO SLOBODNO KOVANJE
2019. urn:nbn:hr:128:548616
Vukelić, Mario
Karlovac University of Applied Sciences
The Department of Mechanical Engineering

Cite this document

Vukelić, M. (2019). TRADICIONALNO SLOBODNO KOVANJE (Master's thesis). Karlovac: Karlovac University of Applied Sciences. Retrieved from https://urn.nsk.hr/urn:nbn:hr:128:548616

Vukelić, Mario. "TRADICIONALNO SLOBODNO KOVANJE." Master's thesis, Karlovac University of Applied Sciences, 2019. https://urn.nsk.hr/urn:nbn:hr:128:548616

Vukelić, Mario. "TRADICIONALNO SLOBODNO KOVANJE." Master's thesis, Karlovac University of Applied Sciences, 2019. https://urn.nsk.hr/urn:nbn:hr:128:548616

Vukelić, M. (2019). 'TRADICIONALNO SLOBODNO KOVANJE', Master's thesis, Karlovac University of Applied Sciences, accessed 28 October 2024, https://urn.nsk.hr/urn:nbn:hr:128:548616

Vukelić M. TRADICIONALNO SLOBODNO KOVANJE [Master's thesis]. Karlovac: Karlovac University of Applied Sciences; 2019 [cited 2024 October 28] Available at: https://urn.nsk.hr/urn:nbn:hr:128:548616

M. Vukelić, "TRADICIONALNO SLOBODNO KOVANJE", Master's thesis, Karlovac University of Applied Sciences, Karlovac, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:128:548616

Please login to the repository to save this object to your list.
Metadata
TitleTRADICIONALNO SLOBODNO KOVANJE
Title (english)TRADITIONAL FREE FORGING
AuthorMario Vukelić
MentorTomislav Božić (mentor)
Committee memberNikola Šimunić (predsjednik povjerenstva)
Committee memberTihana Kostadin (član povjerenstva)
Committee memberTomislav Božić (član povjerenstva)
GranterKarlovac University of Applied Sciences
(The Department of Mechanical Engineering)
Karlovac
Defense date and country2019-07-09, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Ovim završnim radom opisan je postupak oblikovanja metala toplim deformiranjem odnosno kovanjem sa posebnim naglaskom na slobodnom kovanju. U općem dijelu ukratko je dan pregled podjele kovanja te je opisan sam postupak kovanja, alat koji se pritom koristi, kovačke vatre te mehanički strojevi koji se upotrebljavaju kod strojnog kovanja. Ukratko je opisano kovanje u ukovnjima. Nakon kovanja opisani su materijali koji se koriste u eksperimentalnom dijelu te postupci kojim će se ispitivati finalni proizvod ovog rada, a to je oštrica. U eksperimentalnom dijelu provedena je izrada „Bowie“ noža slobodnim kovanjem, nakon čega su izvršena laboratorijska mjerenja kovanog materijala i praktična testiranja oštrine sa raznim testovima. Shodno provedenom eksperimentalnom dijelu analizirani su dobiveni rezultati i na temelju čega je donesen zaključak.
Abstract (english)
This final paper described a method of forming metal by forging or hot deformation with emphasis on a free forging. In the general section briefly reviews the division of forging and described the procedure forging tools used for that purpose, forging fire and mechanical machines that are used in forging machine. In short, the forearm is described. After forging describes materials used in the experimental part, and procedures that will be examined by the final product of this work, and the blade. In the experimental part, a "Bowie" knife was made by free forging, followed by laboratory measurements of wound material and practical sharpening tests with various tests. According to the performed experimental part, the obtained results were analyzed and based on which the conclusion was made.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:128:548616
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: specialist graduate
Academic / professional title: stručni/a specijalist/specijalistica inženjer/inženjerka strojarstva (stručni/a specijalist/specijalistica inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-12-02 08:13:10