prikaz prve stranice dokumenta Konstrukcija i izrada tambure
  Download
PDF 2.13 MB
undergraduate thesis
Konstrukcija i izrada tambure
2018. urn:nbn:hr:128:177967
Bat, Dario
Karlovac University of Applied Sciences
The Department of Mechanical Engineering

Cite this document

Bat, D. (2018). Konstrukcija i izrada tambure (Undergraduate thesis). Karlovac: Karlovac University of Applied Sciences. Retrieved from https://urn.nsk.hr/urn:nbn:hr:128:177967

Bat, Dario. "Konstrukcija i izrada tambure." Undergraduate thesis, Karlovac University of Applied Sciences, 2018. https://urn.nsk.hr/urn:nbn:hr:128:177967

Bat, Dario. "Konstrukcija i izrada tambure." Undergraduate thesis, Karlovac University of Applied Sciences, 2018. https://urn.nsk.hr/urn:nbn:hr:128:177967

Bat, D. (2018). 'Konstrukcija i izrada tambure', Undergraduate thesis, Karlovac University of Applied Sciences, accessed 18 April 2024, https://urn.nsk.hr/urn:nbn:hr:128:177967

Bat D. Konstrukcija i izrada tambure [Undergraduate thesis]. Karlovac: Karlovac University of Applied Sciences; 2018 [cited 2024 April 18] Available at: https://urn.nsk.hr/urn:nbn:hr:128:177967

D. Bat, "Konstrukcija i izrada tambure", Undergraduate thesis, Karlovac University of Applied Sciences, Karlovac, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:128:177967

Please login to the repository to save this object to your list.
Metadata
TitleKonstrukcija i izrada tambure
Title (english)Construction and production of „tambura“
AuthorDario Bat
MentorNikola Šimunić (mentor)
GranterKarlovac University of Applied Sciences
(The Department of Mechanical Engineering)
Karlovac
Defense date and country2018-07-13, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu prikazan je postupak izrade tambure bisernice po uzoru na postojeći gotovi model. Sve mjere dobivene su izmjerama sa stvarnog modela te prenesene na računalo prilikom izrade 3D modela. Model bisernice izrađen je u programskom paketu CATIA te se sastoji od više dijelova koji su međusobno naknadno povezani. Cijeli proces izrade popraćen je objašnjenjima, tehničkom dokumentacijom te predloženim alatima za optimalnu izvedbu. Proces izrade opisan je od samog izrade 3D modela u CATIA programskom sučelju pa do fizičke izvedbe od odabira drveta za izradu trupa, glasnjače, konjića i drugih dijelova pa do završne obrade i lakiranja.
Abstract (english)
In this work is present the procedure of making the „tambura bisernica“ modeled on the existing model. All measurements are obtained by surveys from the actual model and transferred to the computer during 3D modeling. The model of „bisernica“ is made in the CATIA software package and consists of several parts that are subsequently connected to each other. The entire production process is accompanied by explanations, technical documentation and suggested tools for optimum performance. The production process is described from the 3D modeling itself in the CATIA programming interface and up to the physical design of the wood selection for making hulls, loudspeakers, prop and other parts until finishing and varnishing.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:128:177967
Study programmeTitle: Mechatronics
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2018-11-02 12:23:35