prikaz prve stranice dokumenta Hrapovost prototipova izrađenih 3 D print postupkom
  Download
PDF 2.34 MB
undergraduate thesis
Hrapovost prototipova izrađenih 3 D print postupkom
2016. urn:nbn:hr:128:497512
Obranović, Dino
Karlovac University of Applied Sciences
The Department of Mechanical Engineering

Cite this document

Obranović, D. (2016). Hrapovost prototipova izrađenih 3 D print postupkom (Undergraduate thesis). Karlovac: Karlovac University of Applied Sciences. Retrieved from https://urn.nsk.hr/urn:nbn:hr:128:497512

Obranović, Dino. "Hrapovost prototipova izrađenih 3 D print postupkom." Undergraduate thesis, Karlovac University of Applied Sciences, 2016. https://urn.nsk.hr/urn:nbn:hr:128:497512

Obranović, Dino. "Hrapovost prototipova izrađenih 3 D print postupkom." Undergraduate thesis, Karlovac University of Applied Sciences, 2016. https://urn.nsk.hr/urn:nbn:hr:128:497512

Obranović, D. (2016). 'Hrapovost prototipova izrađenih 3 D print postupkom', Undergraduate thesis, Karlovac University of Applied Sciences, accessed 06 December 2024, https://urn.nsk.hr/urn:nbn:hr:128:497512

Obranović D. Hrapovost prototipova izrađenih 3 D print postupkom [Undergraduate thesis]. Karlovac: Karlovac University of Applied Sciences; 2016 [cited 2024 December 06] Available at: https://urn.nsk.hr/urn:nbn:hr:128:497512

D. Obranović, "Hrapovost prototipova izrađenih 3 D print postupkom", Undergraduate thesis, Karlovac University of Applied Sciences, Karlovac, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:128:497512

Please login to the repository to save this object to your list.
Metadata
TitleHrapovost prototipova izrađenih 3 D print postupkom
Title (english)Roughness of the prototipes made by the 3D printing process
AuthorDino Obranović
MentorNikola Šimunić (mentor)
Committee memberNikola Šimunić (predsjednik povjerenstva)
Committee memberTihomir Mihalić (član povjerenstva)
Committee memberTanja Tomić (član povjerenstva)
Committee memberJasna Sabljarić (član povjerenstva)
GranterKarlovac University of Applied Sciences
(The Department of Mechanical Engineering)
Karlovac
Defense date and country2016-10-28, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
U ovom završnom radu opisan je razvoj aditivnih tehnologija od samih početaka pa sve do današnjih modernih visokokvalitetnih postupaka. Uz opis najznačajnijih postupaka aditivne tehnologije, posebno sam se osvrnuo na postupak 3D tiskanja jer sam mjerio hrapavost epruveta izrađenih tim postupkom, ali različitih debljina slojeva izrade. Pomoću tih mjerenja epruveta s različitim debljinama slojeva izrade ustanovio sam da će hrapavost biti veća što je sloj izrade veći i obrnuto.
Abstract (english)
This final paper describes the development of additive technology from beginning until the present modern high-quality processes. With a description of the principal methods of additive technology, I especially mentioned the process of 3D printing because I measured the roughness of the test tubes made by this process, but with a different thickness of layers in their making. Using these measurement of the test tubes with a different thickness of layers, I established that the roughnesse is higher as the layer thickness is higher and vice versa.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:128:497512
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2017-03-07 08:46:00